100Gbps DQPSK LN Modulator(Dual Electrode Model)

Specifications

Model		T·SBZH1.5-30PD-ADC-P-Z
Operating wavelength		1.55µm
Insertion loss		</=9.0dB
Drive voltage at RF port 1)		</=4.0Vp-p
Optical bandwidth 2)		>/=25GHz
ON/OFF extinction ratio @DC		>/=20dB
Optical return loss		>/=30dB
Maximum input power		50mW
Electrical impedance		approx.50Ohm
RF connector		V connector
Optical fiber	Input	0.9mm PMF3)
	Output	0.9mm PMF3)
Optical connector	Input	Optional
	Output	Optional
Fiber lead length		Min 0.7m each port
Operating temperature		10-40ºC
Polarizer		Included
PD		Optional

*1: Measured at 20 GHz (single drive ). DC Block Should be located at the RF port. *2: 3 dB down measured (1 GHz reference, 3% smoothing). No dips larger than 10dB exist in the optical frequency reaponse S21 up to 50GHz. *3: Input and output state of polarization is aligned with slow axis of PMF.

Ordering Information

*1: When Other 'O' is selected in the above ordering code, plese specify your requirements with as much detail as possible. *2: The Polarization state of input and output PMF is slow axis aligned.

This work was partly sponsored by NICT* *NICT : National Institute of Information and Communications Technology.

Package size(Hermetically-sealed)

2009 SEPTEMBER *Specifications subject to change without any notice.